Stone wool panels FRONTROCK S are used to insulate the edges of openings when installing external wall plastering systems. They can also be used for warming walls and plinths, as a basis for plastering.NoteFRONTROCK S panels with a thickness of 20 mm and 30 mm can have a smooth surface (without visible impressions of the conveyor network). The panels are glued to the wall and fixed mechanically with studs. The exact number of studs must be calculated.
Stone wool panels ROCKSONIC SUPER are used for vertical, horizontal or inclined walls of frame constructions that are not affected by operational loads (in light frame construction walls, brick three-layer wall constructions, attics or roof constructions between rafters, additional wall insulation in frame constructions, mezzanine ceilings and floors above the basement). , for thermal and sound insulation. ROCKSONIC SUPER panels absorb sound very effectively, so they are used for sound insulation of partitions.
SUPERROCK panels are used for vertical, horizontal or inclined partitions of a frame construction that are not affected by operational loads (in light partitions and walls of a frame construction, constructions of brick three-layer walls, attics or roof constructions between rafters, additional wall insulation in frame constructions, mezzanine ceilings and floors above the basement). , for thermal and sound insulation.
Stone wool panels FASROCK LL are used for insulation of plastered external walls, as a basis for plastering.
Note
The panels are glued to the wall so that the fiber of the stone wool is perpendicular to the base. Glue is applied to the entire surface of the board. The insulating material must be close to the base, and the adjacent panels must be tightly pressed together to avoid gaps. Although the panels are extremely stable, but in order to prevent them from shifting, additionally, the mechanically precise number of studs must be calculated. FASROCK LL panels are suitable for insulation of buildings with clinker tile finishing (in this case, additional fastening with studs through the reinforcing mesh is necessary).
Gluing
FASROCK LL is glued to the wall with a smooth (non-rough) surface.
Silopor EPS 50 is an effective, long-lasting thermal insulation that does not absorb moisture and does not change its insulating and physical properties during the entire period of service in the structure.
Product purpose:
external wall with thermal insulation on the outside, covered with sheet elements, panelling, tin, etc.; external layered wall with thermal insulation inside; external wall insulated in the room (from the inside); roof with thermal insulation between the rafters; roof with thermal insulation under the rafters, heated in the room (from the inside).
Product marking:
EPS – EN – 13163 – T(2) – L(3) –W(2) – S(5) – P(10)- BS75 – CS(10)50 – DS(70,-)1- DS(N)2
Silopor EPS 70 is an effective, long-lasting thermal insulation that does not absorb moisture and does not change its insulating and physical properties during the entire period of service in the structure.
Purpose of the product:
insulation of facades - walls with thermal insulation on the outside, covered with plaster. It can also be used for thermal insulation of other building elements.
Product marking:
EPS – EN – 13163 – T(2) – L(2) –W(2) – S(2) – P(5)-BS115 – CS(10)70 – DS(50,90)1-DS(N)2-TR100-WL(T)2
Silopor EPS 80 is an effective, long-lasting thermal insulation that does not absorb moisture and does not change its insulating and physical properties during the entire period of service in the structure.
Purpose of the product:
for heated floors in residential and public buildings; for the insulation of flat roofs, for roofs with thermal insulation over rafters or other supporting structures, rigid or solid covering over thermal insulation (tiles, concrete, profiled tin, etc.)
Product marking:
EPS – EN – 13163 – T(2) – L(3) –W(2) – S(5) – P(10)- BS125 – CS(10)80 – DS(70,-)1-DS(N)2
Silopor EPS 100 is an effective, long-lasting thermal insulation that does not absorb moisture and does not change its insulating and physical properties during the entire period of service in the structure.
Purpose of the product:
for roofs with thermal insulation, protected by a roll coating from atmospheric precipitation; for external thermal insulation of basement walls; for loaded floors with thermal insulation under the levelling layer of concrete, there may be contact with the soil
Product marking:
EPS – EN – 13163 – T(2) – L(3) –W(2) – S(5) – P(10)- BS150 – CS(10)100 – DS(70,-)1- DS(N)2- DLT(2)5
Silopor EPS 150 is an effective, long-lasting thermal insulation that does not absorb moisture and does not change its insulating and physical properties during the entire period of service in the structure.
Purpose of the product:
for thermal insulation of foundations, outer walls of the basement, and industrial floors, when the load on the thermal insulation is high (vehicle traffic near the basement, floors of refrigerators, etc.). For thermal insulation of roofs with heavy loads (terraces, green roofs, etc.); for the installation of roads, embankments, and frost insulation.
Product marking:
EPS – EN – 13163 – T(2) – L(3) –W(2) – S(5) – P(10)- BS200 – CS(10)150 – DS(70,-)1-DS(N)2- DLT(2)5 – WL(T)3
Silopor EPS 200 is an effective, long-lasting thermal insulation that does not absorb moisture and does not change its insulating and physical properties during the entire period of service in the structure.
Purpose of the product:
for thermal insulation of floors of specially loaded industrial facilities (refrigerators, storage rooms, etc.); for thermal insulation of roofs with particularly high loads (terraces, green roofs, etc.); for the construction of roads and embankments; for frost insulation.
Product marking:
EPS – EN – 13163 – T(2) – L(3) –W(2) – S(5) – P(10)- BS250 – CS(10)200 – DS(70,-)1- DS(N)2- WL(T)2 - CC(2/1/10)70
Silopor Neo is very efficient, durable, and load-resistant, does not absorb moisture, does not change its insulating and physical properties during the entire period of service in the structure, thermal insulation of a grayish shade.
Purpose of the product:
for insulation of facades - walls with thermal insulation on the outside, covered with plaster. Can also be used for thermal insulation of other building elements.
Product marking:
EPS – EN – 13163 – T(2) – L(2) –W(2) – S(2) – P(5)- BS115 – CS(10)70 – DS(70,-)1-DS(N)2-TR100
Silopor Neo is very efficient, durable, and load-resistant, does not absorb moisture, does not change its insulating and physical properties during the entire period of service in the structure, thermal insulation of a grayish shade.
Purpose of the product:
for heated floors in residential and public buildings; for roofs with thermal insulation over rafters or other supporting structures, rigid or hard coating over thermal insulation (tiles, concrete, profiled sheet, etc.)
Product marking:
EPS – EN – 13163 – T(2) – L(3) –W(2) – S(5) – P(10)- BS125 – CS(10)80
Silopor Neo is very efficient, durable, and load-resistant, does not absorb moisture, does not change its insulating and physical properties during the entire period of service in the structure, thermal insulation of a grayish shade.
Purpose of the product:
for roofs with thermal insulation, protected by a roll coating from atmospheric precipitation; for external thermal insulation of basement walls; for loaded floors with thermal insulation under the levelling layer of concrete, there may be contact with the soil.
Product marking:
EPS – EN – 13163 – T(2) – L(3) –W(2) – S5) – P(10)- BS150 – CS(10)100
Silopor Ekstra Neo - very effective, long-lasting, does not absorb moisture, does not change its insulating and physical properties during the entire period of service in the structure, thermal insulation of a grayish shade
Purpose of the product:
for insulation of facades - walls with thermal insulation on the outside, covered with plaster. It can also be used in other composite thermal insulation systems of buildings.
Product marking:
EPS – EN – 13163 – T(2) – L(3) –W(2) – S(5) – P(10) - BS100 – TR100 – DS(N)2– WL(T)2 - MU30
Silopor EPS T - efficient, durable, does not absorb moisture, does not change its insulating and physical properties during the entire period of service in the structure, heat and shock sound insulation
Purpose of the product:
floors under the leveling layer of concrete in residential, administrative, recreation, etc. for heating in buildings, when impact sound insulation requirements are imposed.
Product marking:
EPS – EN – 13163 – T(1) – L(3) –W(2) – S(5) – P(10)-BS50 – DS(N)5–2 cm–CP2–SD30, 3 cm–CP3–SD20, 5 cm–CP5–SD15
For interlayer heating of buildingsExternal layered wall with a layer of polystyrene foam inside it. External layered wall with a layer of polystyrene foam on the outside, covered with sheet elements, siding, etc.Use of EPS according to ST 212455837.01.2013 "Insulation of partitions with polystyrene foam"
the outer wall is insulated from the inside
Exterior wall in a frame building, panel wall
Roof with a layer of polystyrene foam between the rafters
Roof with a layer of polystyrene foam under the rafters
Insulation of building facadesExternal insulation of building facades with polystyrene foam panels is the most effective thermal insulation effect in both new construction and renovation of old buildings.Use of EPS according to ST 212455837.01.2013 "Insulation of partitions with polystyrene foam"
Facade insulation - the outer wall with thermal insulation is covered with plaster
Used in certified facade heating systems (ETICS)
Floor with thermal insulation under the leveling layer of concrete, the load acting on the floor surface is medium
Insulation of building facadesExternal insulation of building facades with polystyrene foam panels is the most effective thermal insulation effect in both new construction and renovation of old buildings.Use of EPS according to ST 212455837.01.2013 "Insulation of partitions with polystyrene foam"
Facade insulation - the outer wall with thermal insulation is covered with plaster
Used in certified facade heating systems (ETICS)
Floor with thermal insulation under the leveling layer of concrete, the load acting on the floor surface is medium
Insulation of building facadesExternal insulation of building facades with polystyrene foam panels is the most effective thermal insulation effect in both new construction and renovation of old buildings.Use of EPS according to ST 212455837.01.2013 "Insulation of partitions with polystyrene foam"
The outer wall of the basement with thermal insulation on the outside;
A pitched roof (upper layer);
Roof protected by roll cover, high load;
Floor with thermal insulation under the leveling layer of concrete in contact with the ground.
Terrace heatingExternal insulation of building facades with polystyrene foam panels is the most effective thermal insulation effect in both new construction and renovation of old buildings.Use of EPS according to ST 212455837.01.2013 "Insulation of partitions with polystyrene foam"
The outer wall of the basement with thermal insulation on the outside, and a very high load affecting the thermal insulation;
Rolled roof, the roof load is very high (terraces, etc.).
Floor with thermal insulationA floor with thermal insulation under the levelling layer of concrete, may be in contact with the ground, without sound insulation requirements; the load acting on the floor surface is high (in book stores, archives, industrial enterprises, parking lots, swimming pools, etc.).Use of EPS according to ST 212455837.01.2013 "Insulation of partitions with polystyrene foam"
Roof with thermal insulation, not protected from atmospheric precipitation
Floors in refrigerators, storage of fruits, vegetables, meat and other food products, etc.
Floors with thermal insulation under the leveling concrete layer, in industrial buildings, the load is particularly high.
Foundation warmingUse of EPS according to ST 212455837.01.2013 "Insulation of partitions with polystyrene foam"
The outer wall of the basement with thermal insulation on the outside
Pitched roof (upper layer)
Roof protected by roll cover, high load
Floor with thermal insulation under the leveling layer of concrete in contact with the ground
Warming of building facadesExternal insulation of building facades with polystyrene foam panels is the most effective thermal insulation effect in both new construction and renovation of old buildings.Use of EPS according to ST 212455837.01.2013 "Insulation of partitions with polystyrene foam"
Facade insulation - the outer wall with thermal insulation is covered with plaster
Used in certified facade insulation systems (ETICS)
Floor with thermal insulation under the leveling layer of concrete, the load acting on the floor surface is medium
It is used for the insulation of flat roofs and floors (for heated floors in residential and public buildings; for roofs with thermal insulation over rafters or other supporting structures).
For heated floors in residential and public buildings
In pitched roofs
Roof with thermal insulation above the rafters.
It is used for medium-load flat roofs and floor insulation for roofs with thermal insulation, for external thermal insulation of basement walls; for loaded floors with thermal insulation under the leveling layer of concrete, there may be contact with the soil.
For heated floors in residential and public buildings
In pitched roofs
Roof with thermal insulation above the rafters.
"TERMOPORAS" - long-lasting white polystyrene foam panels. Suitable for warming all building partitions.Polystyrene foam panels "TERMOPORAS" can be used to insulate all building partitions. Insulating wall panels can be installed both from the outside and from the inside or into the wall gap. "TERMOPORO" panels can be used to insulate pitched and pitched roofs. It is convenient to insulate floors and foundations with "TERMOPORAS" panels, as polystyrene foam can withstand high loads. It is used for interlayer insulation of walls and pitched roofs.
Compressive stress at 10% strain (kPa) ≥50
Bending strength (kPa) ≥75
"TERMOPORAS" - long-lasting white polystyrene foam panels. Suitable for warming all building partitions. Polystyrene foam panels "TERMOPORAS" can be used to insulate all building partitions. Insulating wall panels can be installed both from the outside and from the inside or into the wall gap. "TERMOPORO" panels can be used to insulate pitched and pitched roofs. It is convenient to insulate floors and foundations with "TERMOPORAS" panels, as polystyrene foam can withstand high loads. It is used for the insulation of facades with a small load.
Compressive stress at 10% strain (kPa) ≥60
Bending strength (kPa) ≥100
"TERMOPORAS" - long-lasting white polystyrene foam panels. Suitable for warming all building partitions. Polystyrene foam panels "TERMOPORAS" can be used to insulate all building partitions. Insulating wall panels can be installed both from the outside and from the inside or into the wall gap. "TERMOPORO" panels can be used to insulate pitched and pitched roofs. It is convenient to insulate floors and foundations with "TERMOPORAS" panels, as polystyrene foam can withstand high loads. It is used for warming floors with a small load.
Compressive stress at 10% strain (kPa) ≥70
Bending strength (kPa) ≥115
"TERMOPORAS" - long-lasting white polystyrene foam panels. Suitable for warming all building partitions. Polystyrene foam panels "TERMOPORAS" can be used to insulate all building partitions. Insulating wall panels can be installed both from the outside and from the inside or into the wall gap. "TERMOPORO" panels can be used to insulate pitched and pitched roofs. It is convenient to insulate floors and foundations with "TERMOPORAS" panels, as polystyrene foam can withstand high loads. It is used for warming floors with a small load. for heating flat roofs and floors
Compressive stress at 10% strain (kPa) ≥80
Bending strength (kPa) ≥125
"TERMOPORAS" - long-lasting white polystyrene foam panels. Suitable for warming all building partitions. Polystyrene foam panels "TERMOPORAS" can be used to insulate all building partitions. Insulating wall panels can be installed both from the outside and from the inside or into the wall gap. "TERMOPORO" panels can be used to insulate pitched and pitched roofs. It is convenient to insulate floors and foundations with "TERMOPORAS" panels, as polystyrene foam can withstand high loads. It is used for heating medium-load flat roofs and floors (halls, cafes).
Compressive stress at 10% strain (kPa) ≥100
Bending strength (kPa) ≥150
"TERMOPORAS" - long-lasting white polystyrene foam panels. Suitable for warming all building partitions. Polystyrene foam panels "TERMOPORAS" can be used to insulate all building partitions. Insulating wall panels can be installed both from the outside and from the inside or into the wall gap. "TERMOPORO" panels can be used to insulate pitched and pitched roofs. It is convenient to insulate floors and foundations with "TERMOPORAS" panels, as polystyrene foam can withstand high loads. It is used for the insulation of flat roofs with an increased load (terraces, green roofs).
Compressive stress at 10% strain (kPa) ≥150
Bending strength (kPa) ≥200
"TERMOPORAS" - long-lasting white polystyrene foam panels. Suitable for warming all building partitions. Polystyrene foam panels "TERMOPORAS" can be used to insulate all building partitions. Insulating wall panels can be installed both from the outside and from the inside or into the wall gap. "TERMOPORO" panels can be used to insulate pitched and pitched roofs. It is convenient to insulate floors and foundations with "TERMOPORAS" panels, as polystyrene foam can withstand high loads. It is used for warming floors with a very high load (parking lots, industrial buildings, warehouses).
Compressive stress at 10% strain (kPa) ≥200
Bending strength (kPa) ≥250
Compressive stress at 10% strain (kPa) ≥70
Bending strength (kPa) ≥115
NEOPORAS" - effective thermal insulation. It is used to insulate building foundations, floors, facades and roofs."NEOPORAS" is a gray colored polystyrene foam whose thermal insulation properties are improved by adding graphite to the polystyrene foam raw material. Small graphite particles reflect or absorb infrared rays, thus significantly reducing heat loss. NEOPORO's thermal insulation properties are up to 20% better than ordinary polystyrene foam of similar density. For example, the thermal conductivity coefficient of "TERMOPORAS" EPS 70 is 0.039 W/(m•K), while "NEOPORAS" EPS 70 is 0.032 W/(m•K). Better thermal insulation properties allow thinning the thickness of the layer of thermal insulation material up to 20%. This is extremely relevant, because the national norms set increasingly higher requirements for the thermal resistance of buildings, so in order to fulfill these requirements, it is necessary to increase the thickness of the thermal insulation layer. NEOPORAS is also used in the design of so-called 3-liter and passive houses.The biggest advantage of "NEOPORO" compared to other thermal insulation materials is eco-efficiency. Due to its very good thermal insulation properties, the required resistance of the building envelope is achieved with a lower amount than other thermal insulation materials, at the same time, the consumption of raw materials and energy resources decreases, and CO2 emissions are reduced. All this makes it possible to effectively combat climate change. It is used to insulate floors with a small load.
Compressive stress at 10% strain (kPa) ≥70
Bending strength (kPa) ≥115
NEOPORAS" - effective thermal insulation. It is used to insulate building foundations, floors, facades and roofs."NEOPORAS" is a gray colored polystyrene foam whose thermal insulation properties are improved by adding graphite to the polystyrene foam raw material. Small graphite particles reflect or absorb infrared rays, thus significantly reducing heat loss. NEOPORO's thermal insulation properties are up to 20% better than ordinary polystyrene foam of similar density. For example, the thermal conductivity coefficient of "TERMOPORAS" EPS 70 is 0.039 W/(m•K), while "NEOPORAS" EPS 70 is 0.032 W/(m•K). Better thermal insulation properties allow thinning the thickness of the layer of thermal insulation material up to 20%. This is extremely relevant, because the national norms set increasingly higher requirements for the thermal resistance of buildings, so in order to fulfill these requirements, it is necessary to increase the thickness of the thermal insulation layer. NEOPORAS is also used in the design of so-called 3-liter and passive houses.The biggest advantage of "NEOPORO" compared to other thermal insulation materials is eco-efficiency. Due to its very good thermal insulation properties, the required resistance of the building envelope is achieved with a lower amount than other thermal insulation materials, at the same time, the consumption of raw materials and energy resources decreases, and CO2 emissions are reduced. All this makes it possible to effectively combat climate change.It is used to insulate facades by covering polystyrene foam with plaster or sheet elements from the outside
Compressive stress at 10% strain (kPa) ≥80
Bending strength (kPa) ≥125
NEOPORAS" - effective thermal insulation. It is used to insulate building foundations, floors, facades and roofs."NEOPORAS" is a gray colored polystyrene foam whose thermal insulation properties are improved by adding graphite to the polystyrene foam raw material. Small graphite particles reflect or absorb infrared rays, thus significantly reducing heat loss. NEOPORO's thermal insulation properties are up to 20% better than ordinary polystyrene foam of similar density. For example, the thermal conductivity coefficient of "TERMOPORAS" EPS 70 is 0.039 W/(m•K), while "NEOPORAS" EPS 70 is 0.032 W/(m•K). Better thermal insulation properties allow thinning the thickness of the layer of thermal insulation material up to 20%. This is extremely relevant, because the national norms set increasingly higher requirements for the thermal resistance of buildings, so in order to fulfill these requirements, it is necessary to increase the thickness of the thermal insulation layer. NEOPORAS is also used in the design of so-called 3-liter and passive houses.The biggest advantage of "NEOPORO" compared to other thermal insulation materials is eco-efficiency. Due to its very good thermal insulation properties, the required resistance of the building envelope is achieved with a lower amount than other thermal insulation materials, at the same time, the consumption of raw materials and energy resources decreases, and CO2 emissions are reduced. All this makes it possible to effectively combat climate change.
Used for flat roof and floor insulation
Compressive stress at 10% strain (kPa) ≥100
Bending strength (kPa) ≥150
NEOPORAS" - effective thermal insulation. It is used to insulate building foundations, floors, facades and roofs."NEOPORAS" is a gray colored polystyrene foam whose thermal insulation properties are improved by adding graphite to the polystyrene foam raw material. Small graphite particles reflect or absorb infrared rays, thus significantly reducing heat loss. NEOPORO's thermal insulation properties are up to 20% better than ordinary polystyrene foam of similar density. For example, the thermal conductivity coefficient of "TERMOPORAS" EPS 70 is 0.039 W/(m•K), while "NEOPORAS" EPS 70 is 0.032 W/(m•K). Better thermal insulation properties allow thinning the thickness of the layer of thermal insulation material up to 20%. This is extremely relevant, because the national norms set increasingly higher requirements for the thermal resistance of buildings, so in order to fulfill these requirements, it is necessary to increase the thickness of the thermal insulation layer. NEOPORAS is also used in the design of so-called 3-liter and passive houses.The biggest advantage of "NEOPORO" compared to other thermal insulation materials is eco-efficiency. Due to its very good thermal insulation properties, the required resistance of the building envelope is achieved with a lower amount than other thermal insulation materials, at the same time, the consumption of raw materials and energy resources decreases, and CO2 emissions are reduced. All this makes it possible to effectively combat climate change.
It is used for heating medium-load flat roofs and floors (halls, cafes).
Compressive stress at 10% strain (kPa) ≥100
Bending strength (kPa) ≥150
"GEOPORAS" - insulation with low water absorption. Used in contact with soil."GEOPORAS" is a greenish polystyrene foam with low water absorption. GEOPORAS differs from ordinary polystyrene foam in that it has less long-term water absorption after immersion in water. For the production of polystyrene foam "GEOPORAS" special raw material for the production of such polystyrene foam is used, as well as the mode of the technological process is changed. "GEOPORAS" is characterized not only by very low water absorption, but also by better other physical and mechanical properties (compressive stress when the product is deformed by 10% and strong during bending). "GEOPORAS" suggests using it for warming basement walls and floors under the levelling concrete layer, when there is contact with the ground.This type of polystyrene foam can be used as an analogue of extruded polystyrene foam (XPS). GEOPORAS has low water absorption and is cheaper than extruded polystyrene foam. It is used for warming the outer walls and floors of the basement, when there is contact with the ground.
