For interior works
Simple and easy to install
Non-combustible, complying with class A2-s1, d0 according to LST EN13501-1
Can be bent
Extensive design possibilities
Low indentation and deformation characteristic
Free from harmful materials
Mechanically resistant
Easy to transport and process
Knauf Red is designed for interior applications such as partitions, wall cladding, attics, cavity wall constructions and suspended ceilings under black ceilings or wooden beams. The panel shall be mounted on metal profiles or a wooden frame. It can also be bonded to concrete or masonry with Knauf Perflix
Board for dry construction systems (GKBI)Knauf GREEN panels are used for the installation of all indoor rooms with normal humidity ((i.e. where the long-term relative humidity does not exceed 70%, such as domestic bathrooms). This is a dry construction panel used in systems for which no specific requirements are imposed.
Impregnated, i.e. i.e. lower water absorption.
Simple installation.
Bendable.
Various decorative profiles can be obtained by milling.
Small cracks and deformations caused by environmental climate changes.
The Knauf GREEN panel is intended for the installation of indoor rooms with normal humidity (up to 70%):
Plasterboard ceilings and partitions.
Installation of mansards.
Metal frame partitions and ceilings.
Wooden frame partitions and ceilings.
Panel-frame buildings.
Wall decoration.
Panel type: H2 – complies with the LST EN520 standard; GKBI - complies with standard DIN18180
Cardboard colour: greenish
Type of edges: HRAK
Flammability class: A2-s1, d0, according to EN520
Water vapor conductivity (diffusion) coefficient μ: dry 10, wet 4, according to LST EN ISO 10456
Thermal conductivity coefficient λ: 0.25 W/mK, according to DIN EN ISO 10456
For interior work
Simple and easy to install
Non-flammable, corresponds to class A2-s1, d0 according to LST EN13501-1
Bending is possible
Great design possibilities
Small nicks and deformations are characteristic
Without harmful substances
Mechanically resistant
Easy to transport and process
The Knauf White panel is intended for interior spaces: partitions, wall cladding, attics, shaft wall structures and suspended ceilings to be installed under "black" ceilings or wooden beams. The panel is mounted on metal profiles or a wooden frame. It can also be glued on concrete with masonry glue Knauf Perflix.
Panel type: A – complies with the LST EN520 standard; GKB - complies with standard DIN18180
Cardboard color: light gray; Combustibility class: LST EN 13501-1, corresponds to class A2-s1, d0 according to EN520
Water vapor conductivity (diffusion) coefficient μ: 10, according to LST EN ISO 10456
Thermal conductivity coefficient λ: 0.21 W/mK, according to DIN EN ISO 10456
Limiting bending loads: when the plate thickness is 12.5 mm in the longitudinal direction: ≥7.3 N/mm², in the transverse direction: ≥2.7 N/mm².
Universal board for high value dry construction systems (GKFI)
Knauf Blue panels are used in all cases where interior rooms are installed. It is a universal dry construction panel used in systems that require fire safety, sound insulation and physical strength. The panel is impregnated and suitable for use in rooms with normal humidity.
Universal use.
Higher allowable partition heights due to higher panel strength.
The plate better holds loads of fasteners.
Strong surface.
The plate is impregnated, i.e. i.e. lower water absorption.
High resistance to fire.
The special plaster core of the panel ensures good sound insulation.
Easy to install.
Bendable (12.5 mm thick).
Various decorative profiles are possible due to possible milling.
Small cracks and deformations are caused by changes in the environment's climate.
